SPARTUS®
EasyMIG 210S
SYNERGIC MIG / MAG WELDING
Technical parameters
| Input | ~1× 230V ± 10% 50 / 60 Hz |
| Welding current MIG [A] | 50 – 200 |
| Duty cycle MIG [%] | 60 |
| MIG PARAMETERS | |
| Output working voltage MIG [V] | 16,5 – 24 |
| Wire feeding speed [m/min] | 2 – 12,5 |
| Wire feeder | builid-in, 2 - roll gear |
| Welding wire spool [mm] | ≤ 5[kg], Ø200 |
| Wire diameter Ø [mm] | 0.6 / 0.8 / 1.0 |
| 2T/4T switch |  |
| Inductance control | |
| Wire test | |
| Synergy | |
| Manual correction to synergy | |
| MIG/MAG polarization change | |
| TIG PARAMETERS | |
| TIG welding | |
| Welding current TIG [A] | 10 – 200 |
| Duty cycle TIG [%] | 60 |
| MMA PARAMETERS | |
| MMA welding | |
| Welding current MMA [A] | 10 – 160 |
| Hot Start | |
| Arc Force | |
| VRD | |
| Duty cycle MMA [%] | 60 |
| OTHER | |
| Max. current consumpiton [A] | MIG 35 / TIG 26 / MMA 33 |
| Power factor (cosφ) | 0,76 |
| Efficiency η [%] | 85 |
| Insulation class | H |
| Protection class | IP21S |
| Weight [kg] | 9 |
| Dimensions [mm] | 470 × 190 × 300 |
Description:
SPARTUS® EasyMIG 210S is a modern, inverter welding semi-automatic device, based on IGBT
transistors. It enables welding by means of a consumable electrode shielded by inert (MIG) or active (MAG)
gases, welding with coated electrode (MMA) and TIG lift welding. In addition, the device thanks to the ability
to change the polarity of welding, enables welding with flux cored welding wire without gas.
The maximum welding current for the MIG / MAG / TIG method is 200A. For the MMA welding method it is 160A. The
unit is powered from single-phase network 230V.
SPARTUS® EasyMIG210S is equipped with synergistic programs for MIG / MAG
welding with steel wires in the range diameter 0,6 / 0,8 / 1,0 mm. In addition, the device has an
ability to manually adjust set parameters.
Easy change of polarity allows a gas-free self-shielding wire welding.
Thanks to the use of modern technological solutions, the welder is equipped with a number of functions
supporting the welding process:
- 2T / 4T - possibility to choose one of two operating modes (MIG/ MAG)
- welding inductivity regulation — face fusion width and deep control (MIG/MAG), reduction
of welding splinters
- Hot Start - an easier electrode ignition (MMA)
- Arc Force - an easier welding in forced positions (MMA)
- VRD - reduced no-load voltage (MMA)
Professional two-roller feeder allows smooth and uniform feed of the welding wire. Stable output parameters
ensure obtaining high-quality weld.
Examples of use: workshop, portable repair, automotive, exhaust silencer welding.
Package equipment:
EasyMIG 210S device
MIG gun SPARTUS® SPE 150 3m
weire guide roller 0.8 - 1.0V fi30
electrode holder
work clamp
gas hose with bands
user’s manual
Package
price [EUR]:
